Painting the outside wall: optimally resistant to sun and rain!
Painting your exterior walls is necessary to keep your home looking fresh. If you give your exterior walls a new layer of paint, this will immediately have a huge positive impact on the appearance of your home.
But painting exterior walls is one of the most difficult paintings to do. After all, you have to take into account many different factors. As mentioned, painting exterior walls changes the look of your home enormously. Do not underestimate this impact, especially if you choose a different color.
In addition, exterior walls are naturally exposed to all kinds of weather influences. In order to be able to deal with things like rain and hail year after year, it is important to choose a good type of paint that can withstand this.
In this article we will therefore take a closer look at painting exterior walls. Which paint do you choose? How do you handle it? Do you need a permit? We try to answer all questions that arise in this article.
Which paint for exterior walls?Let's start with an important question. Which paint do you choose for painting exterior walls? As mentioned in the introduction, an exterior wall paint must be weather resistant. In other words, it must be able to cope with moisture and UV rays.
That is why acrylic paint is often chosen when painting exterior walls. Acrylic paint stops moisture from outside, such as rain. In other words, acrylic paint will give your exterior walls a kind of protective layer against rain. Moreover, it is a vapor permeable paint, which means that the moisture from the inside does escape through the wall. This is important to avoid moisture problems in your walls.
Other advantages of acrylic paint are that it is resistant to UV radiation and that it has a fairly short drying time.
Acrylic paint is generally the most commonly used type of paint for painting exterior walls, but there are also a few alternatives. For example, you can also opt for alkyd paint, a synthetic and water-repellent type of paint. Alkyd paint is quite thick in nature, so it is often thinned with white spirit. Alkyd paint also dries fairly quickly, usually within 24 hours.
You can also opt for acrylic latex. This type of paint is less porous than regular latex paint. The disadvantage is that you need special paint brushes and paint rollers for this type of paint. As a result, the total cost may be slightly higher.
Which color?In addition to the type of paint, you should of course also consider the color of paint that you are going to use. Although of course you don't have as many options here as when painting interior walls, for example. When painting exterior walls, you have to take things like the environment and legislation into account.
First of all, choose a color that matches the environment. Quite neutral colors are often chosen, such as white, brown or gray.
In addition, it is also important to check whether you are allowed to do your thing under the law. When it comes to exterior walls at the front of your home, you usually need a permit to paint your walls. Exterior walls on the side or the back of your home usually do not require a permit.
Painting exterior walls: step-by-step planFor painting your exterior walls, you largely follow the same steps as for most other paintings. This way you start with good preparation, a phase that should not be underestimated. In some cases, this is followed by the application of a primer. Finally, you finish by applying several finishing coats.
Let's go over all the steps.
STEP 1: the preparationGood preparation is the basis for any type of painting. If you are nonchalant about this, the quality of your painting will be correspondingly, and there is a good chance that you can start all over again in no time. So it is important to properly prepare.
You can only start painting an outside wall when this tip-top is in order. In concrete terms, this means that the outer wall must not be damaged and that it must be neatly cleaned. If not, the paint you are applying will not adhere well to the wall, and it will peel back in no time.
So you start with repairing the wall. If you want to paint a seasoned exterior wall, there is a good chance that this wall already shows some damage here and there. Cracks or fissures are classics, and crumbling joints are also common symptoms of exterior walls that have already withstood some winters.
Before you can start painting an exterior wall, you must first repair all this damage. Crumbling joints must be re-joined, and cracks in the wall must be filled with waterproof mortar. Let everything dry thoroughly before you start the sufficient step: cleaning the wall.
Cleaning the wall is the next step in the preparation process. When your wall is covered with dust or moss, the paint you apply to the wall will have a hard time adhering. It is therefore important to only start painting on a clean and dry wall.
If the outer wall is not too dirty, you can clean it with water or a damp cloth and soft brush. You can use a high-pressure cleaner for a dirty exterior wall, although you must of course be careful not to damage the joints and freshly applied mortar.
Before you start painting the wall, let the wall dry thoroughly.
STEP 2: Apply primerApplying a primer is not something that should be done on a regular basis. Apply a primer or primer in the first place to ensure that your finishing layer adheres well to the wall. But if your exterior wall has been painted in the recent past, you no longer need to apply a new primer.
Priming should be done especially if you have a brick wall that has not received a coat of paint in the past. The primer that you will have to apply in that case will then serve to allow the paint layer that you apply later to adhere well.
It is important to choose the right kind of primer. Of course you choose a primer that is specifically aimed for use in outdoor applications. This type of primer is resistant to moisture, in other words does not allow moisture from rain or hail to penetrate the wall. Exterior primers are also usually vapor-permeable, which means that they still allow moisture in the wall to escape to the outside. In other words, they let the wall 'breathe'.
STEP 3: Apply finishing coatAfter you have applied the primer, it is important to let it dry thoroughly. When the wall is completely dry, you can start applying a first finishing layer.
To apply a finishing layer, it is best to use a long-haired paint roller. Long-haired paint rollers can handle unevenness in the wall more easily. If there are still spots on the wall that you have not been able to reach with your paint roller, you can use a regular brush for these spots.
It is important to choose the right time to paint. Weather factors have a major influence on the result of your outdoor painting work. For example, if it is too hot, your paint layer will dry too quickly, causing it to show cracks. Too much wind will also cause your paint layer to dry too quickly.
Too cold weather is also not good, because then you get the opposite effect. The ideal temperature for painting outside is between 10° and 20° Celsius, preferably on a windless day without too much sun.
Remember:The ideal temperature for painting outside is between 10° and 20° Celsius, preferably on a windless day without too much sun.
Price for painting exterior walls:Painting exterior walls requires a little more skill than any other painting. Not only can your result be admired (or broken down) by everyone, you also have to work at heights, which entails some danger.
It is precisely for this reason that the help of a professional painter is often called in specifically for outdoor painting. Such a painter may cost a little more money, but you do have the guarantee of a nice result, without having to go through breakneck feats.
The total cost of having your exterior walls painted therefore mainly depends on the surface to be painted. But there are also big differences in the hourly wages of different painters. That is why it is interesting to request quotes from different painters, and to compare prices.
Are you searching for a good painting contractor in Los Angeles? Don't look any further! Providing both interior and exterior painting services, we have become the most reputable Painting Contractor Los Angeles to date. Painting both homes and businesses is one of our company's specialties.
Are you planning to carry out painting work in your home, but are you not sure how to get started? On this page we collect all the tips you need to know to bring your painting work to a successful conclusion.
Choose paint: Before you start painting, you should of course know which paint is best to buy. After all, you can find different types of paint in a do-it-yourself store. Each type of paint is suitable for a particular application. For example, you cannot simply use indoor paint for outdoor applications, as you will then get a bad result.
Inside or outside: For indoor applications, the choice is mainly for latex paint, a water-based paint that is relatively cheap. Latex paint is often used for painting interior walls or ceilings.
For outdoor applications, oil-based alkyd paint is preferred. This type of paint is thicker, and also covers the surfaces better. In addition, this paint is more resistant to moisture and other weather elements, which makes it very suitable for painting exterior walls and facades.
If you call on a professional painter, they can always advise you on the right type of paint.
Matt or high gloss: You can also make a choice based on the appearance of the paint. This can vary from matte to high gloss. A matte paint is therefore not glossy at all, but has the advantage that it can easily mask irregularities on a wall or ceiling. The downside is that it doesn't handle dirt and dust very well.
A high gloss paint is the other end, and has a really glossy look, giving it a chic look. High-gloss paint has the advantage that it is easy to wash. The disadvantage is that unevenness on the wall or ceiling is highlighted.
There are also other types of paint available that are located between these two ends. These are called semi-matte paints.
Which color to choose? Choosing the right color is also an important step in the preparation process for painting. Choosing a color is of course largely dependent on your own taste. Yet there are many color combinations that often appear in an interior.
White and light colors: White and light colors are popular because they are neutral and easy to combine with other colors. An additional advantage of light colors is that they radiate tranquility and that they make a room appear larger. Ideal for when you want to paint a small space.
Pastel colors and earth tones: Other soothing colors include earth tones and pastels. Just think of colors such as sand colors, beige, terracotta, lime green and blue. These are also colors that make you relax, but at the same time have a summery touch. Good for a little bit of spice in your interior.
accent wall: Another popular painting technique is to apply an accent wall. Here you will paint one wall in a striking color, while you paint the other colors in a neutral color. The advantage of this is that your accent wall is an eye-catcher that provides the necessary spice, while you still keep the peace in the room with the other neutral colors.
Step-by-step plan for painting Painting work always proceeds according to a sophisticated step-by-step plan. If you follow this step-by-step plan down to the last detail, the chance of a successful result is very high. Especially if you keep our tips in mind while painting.
Preparation Painting always starts with good preparation. A good tip is to start the preparation a day in advance. For example, start by clearing the room you want to paint, and putting all furniture and other accessories aside.
The walls must also be well prepared before you start painting them. You only paint on a wall that is perfectly even and clean. Otherwise, the paint will not adhere well to the wall or ceiling. Here you have to distinguish between an unpainted wall and a wall that has been painted once in the past. Cleaning an unpainted wall is best done with a dry cloth and a stiff brush. A painted wall is more resistant to moisture, as it has already received a protective layer. If the wall does absorb the moisture, then it is porous, so it is best to use a dry cloth.
Is the wall uneven, or does the wall still have holes or cracks? Then it has to be repaired first. By filling holes with filler and then filling the wall for a while, the wall is perfectly prepared for painting.
Apply primer: In most cases the application of a primer is necessary. Only if there is still an old coat of paint on the wall that is still in good condition, then a primer coat is not necessary.
Applying a primer has two major advantages. Primarily, the primer will ensure that the finishing coat will adhere better to the wall. A primer has the additional advantage that you can apply the finishing layer on a white underlayer, so that the color of the finishing layer comes out better.
It is important here that you choose the right primer. For example, there are special primers for outdoor applications that are more resistant to moisture. There are also special primers for damp walls, for example. So be sure to check the packaging of the primer carefully.
Apply finishing coat: Let the base coat dry thoroughly before applying the finishing coat. Normally this takes about 6 to 8 hours, but if you want to be sure, it is best to spend the night here.
You always apply the finishing layer in the same way. Start painting the corners and edges with a paintbrush. You do the large surfaces with a paint roller. Apply the paint vertically to the wall, then roll out horizontally. This will spread the paint well and avoid streaks on the wall.
Try painting the entire surface at once so that the wall or ceiling can dry evenly.
Finish: Remove the masking tape while the paint is still drying. This is easier when the paint has not yet dried completely. Only when the paint has dried can you put the furniture back in its place. This way you avoid stains on your furniture.
Price: There are also a number of interesting tips to give in terms of price. When painting walls or ceilings, you naturally have the choice to do it yourself, or to outsource it to a professional painter. If you go for the second option, you know that the total cost will be more expensive, but that you do have the guarantee of a good result.
Nevertheless, we can give you some tips to keep the price down. For example, painters are cheaper in the winter. After all, most people call on a painter in the spring or summer, when the weather conditions are perfect. This implies that professional painters have less work during the winter months. During this period they try to get more work in by, for example, giving a discount. During the winter months you can sometimes have painting work carried out up to 20% cheaper.
Need a painting contractor in Los Angeles? We can help you with both residential and commercial painting, no matter the size and shape of your property.
Are you itching to put your brush in the paint and get started? We totally understand that. Follow these steps and paint your wall or ceiling in the color of your dreams. A good preparation of the substrate and the environment, a well-considered choice of your material and an efficient approach during the painting itself, ensure a beautiful and sustainable end result.
Step 1 - Clean and Degrease Before you start painting, make sure that the walls and ceiling are completely clean. If you don't do this, there is a chance that the paint will not adhere well, will peel off quickly or show stains. Each surface requires a specific cleaning:
● New plaster and drywall: remove the dust with a soft brush and a damp cloth.
● Brick walls, cementation or concrete: remove any efflorescence or powder with a stiff brush and dust off.
● Old porous paint layers: remove dust with a soft brush.
● Heavily soiled walls: clean with a good degreaser or ammonia water (one part ammonia to nine parts water) and then allow to dry thoroughly.
Tip! This is how you check whether old paint is porous or not: rub the paint with a wet cloth. If the paint absorbs the moisture and turns dark, it is porous.
Step 2 - Repair, Level and Mask For a perfect result, it is necessary that you always start from a dry, even and solid surface where all errors and defects have been addressed first. Allow cleaned walls or new plaster to dry out completely or tackle structural moisture problems thoroughly first.
In principle, sanding is not necessary. For newly plastered or already painted walls, light de-graining with a wide putty knife is sufficient to remove small irregularities. Sanding is necessary for filled holes and cracks, repaired parts, wooden ceilings or walls, old glossy paint layers. Fill holes, tears and larger cracks with a modified filler.
Allow enough time to properly tape and cover anything you are not going to paint . There are different types of tape on the market that are adapted to each specific masking job. For covering large surfaces (furniture, a door) you can use sturdy cover foil.
Tip! Is there a layer of powder on your hand when you rub the wall? Then he is powdered. Use a fixative first to ensure the paint adheres properly.
Step 3 - Prepare Paint and Tools Make sure you have all the materials you need to hand. And don't forget to protect yourself too! Wear gloves when you have to work with chemical products and think of a good dust mask when you sand.
Before opening a jar, wipe dust and dirt off the lid to prevent it from falling into the paint.
Always stir the paint thoroughly for a homogeneous color. Do this with a stirring stick or use a special attachment on your drill.
Unless otherwise stated on the pot, it is not necessary to thin the paint. Diluted paint has less coverage and is therefore less durable. Often a third layer will be needed for a nice end result.
Tip! New brush? Run it over a piece of sandpaper a few times and roll it between your hands to remove any loose hairs. New roller? First wet it well and roll it over a piece of cardboard a few times.
Step 4 - Apply Primer In many cases it is necessary to apply a primer first . This is a primer that ensures an even and durable end result. The actual paint layers will adhere better, any absorption of the substrate is removed, dirt (e.g. nicotine stains) can no longer penetrate to the final layer and the paint consumption is lower. There are different types of primers and it is important to choose the right primer for the specific surface you want to paint.
Tip! If the surface has already been painted and the paint is still in good condition, you can
skip this step.
Step 5 - Apply Wall or Ceiling Paint If you are going to paint both the ceiling and the walls, always start with the ceiling. Finish this all off (base coat and finish coats) and then continue with the walls. If you also plan to paint windows and doors, put this at the top of your list. Do the floor last.
Painting ceiling:• First paint the corners and edges with the brush.
• Dip the roller in the paint and roll over the grid a few times to distribute the paint evenly.
• Start at the window and work along the length of the ceiling. Work in areas of +/- 1m2, which you allow to overlap approximately one roll width. Paint a few horizontal strips of paint in alternating directions (left, right) on the ceiling.
• Immediately distribute the paint by rolling vertically.
• Finish with horizontal rolls towards the window.
• Repeat steps 2 through 5 until you have painted a whole strip across the width of the ceiling, then start on the next strip.
Wall painting:• First paint the corners, the edges with the brush.
• Dip the roller in the paint and roll over the grid a few times to distribute the paint evenly. Do not be too frugal with paint, but also make sure that the paint does not drip off the roller.
• Work in areas of +/- 1m2. First put some vertical stripes on the wall.
• Then go over it horizontally to distribute the paint evenly over the surface.
• Finally, finish in the vertical direction again.
• Repeat steps 2 to 5, overlapping a little bit with the previous plane.
Tip! Always apply two top coats. Let the paint dry long enough (check the package for the correct drying time) before painting the second coat. For an even and streak-free result, it is best to always work in the same way when applying the base and top coats.
Are You Looking for a Painting Contractor Los Angles? If Yes then your search will end with our best professional service interior painter Los Angeles & exterior painter Los Angeles either you are looking for residential painter Los Angeles or Commercial painter Los Angeles. Contact Us!
Pause your painting● Try to put each layer on it at once. If you have to interrupt the work, then finish the surface you are working on and end in a corner. This way the new start will be the least noticeable.
● There is no need to clean the tool between two coats. Scrape off most of the paint and put the roller and brush in a plastic bag that you tie tightly.
Don't forget before you paint inside● Maintain a temperature between 10 and 20°C. If it is warmer, the paint will dry too quickly, at colder temperatures the paint will dry too slowly or not at all. So turn the heating on or off if possible - or wait for better times.
● Provide good humidity. Is the air too dry? Put bowls of water in the room. Too much moisture in the air? Turn on the heating.
● Do not ventilate while painting to avoid drafts, but do open the windows after the painting job. This will allow the paint to dry faster. Do not do this when the weather is humid outside.
● Vacuum the floor before the final coat and postpone other works in the house that can cause dust until after your painting job.
With Our Professional Painter and Exceptional Painting Services, Your Home Will Have A Fresh New Look. Contact Us Today! Do You Need To Paint Your House? We Have A Reliable Team Of Painters Here To Help!
The time you spend in the kitchen every day can hardly be underestimated. Together with the living room and bedroom, the kitchen is perhaps the most important room in your home. That is why it is important that the kitchen continues to look great, and that your kitchen continues to inspire you.
But a complete kitchen renovation is not just financially feasible for everyone. In that case, painting your kitchen is a budget-friendly alternative. And even there you can decide for yourself how far you go. Do you only paint the kitchen cabinets, or do you also paint the walls? What about the ceiling?
Which paint to choose? Because of all that cooking, the kitchen is often a fairly greasy space. So you have to take this into account when choosing the right paint. Choose a paint that is resistant to grease stains and that is easily washable. Roughly speaking, you can choose from three types of paint.
● Lacquer paint is a wear-resistant type of paint, and therefore also ideal for the kitchen.
● Alkyd paint is a thicker type of paint. This type of paint must first be thinned with white spirit.
● Finally, you can also opt for acrylic paint . This is a type of paint that dries quickly, which gives you a little less time to correct any mistakes.
In addition to these three paint types, you also have to make a choice between matte paint and high-gloss paint. Matte paint is perfect for when you want to mask certain imperfections. High-gloss paint gives your kitchen a more chic look. In addition, high-gloss paint is easier to clean, which may not be a bad asset in the kitchen.
As far as paints are concerned, you can do something fun in the kitchen. Think, for example, of board paint or magnetic paint. Board paint is special paint in a dark color that turns your wall into one large chalkboard, as it were. Ideal for writing down certain shopping lists or fun recipes. Board paint is perfectly washable, so you can give free rein to your creativity.
Magnetic paint is a variant of board paint, and allows you to hang certain things with the help of magnets. Also interesting here is to hang shopping lists or nice drawings of the children. Some paints even combine magnetic paint and board paint, so you can combine the best of the two.
Which color to choose? In addition to the type of paint, the choice of the right color is also very important. It is well known that certain labels can influence your mood. Colors can therefore also be a source of inspiration in the kitchen.
Choose colder colors, such as blue or green, if you use your kitchen more functionally. Choose these colors, for example, if the kitchen is only for cooking, and you eat your meals in a separate dining room.
If you also use the kitchen as a dining area, opt for warmer colors, such as red, orange or yellow. This makes you more relaxed in the kitchen after a hard day at work.
Colors can also influence spatial effects. If you have a small kitchen, opt for light colors, as light colors make your kitchen appear larger. Dark colors make your kitchen look smaller. If you have a large kitchen, you can use dark colors, for example to give your kitchen a stylish look.
Kitchen painting: step-by-step plan You approach painting a kitchen in more or less the same way as other painting works. You start with a good preparation, you apply a primer, and you finish with the application of the actual coat of paint.
Preparation The kitchen is a room in which quite a few cupboards are mounted. These cabinets can hinder you in carrying out your painting work. It is therefore advisable to disassemble as many of these cabinets as possible. Removing drawers and doors is often not that much work, and it drastically simplifies your painting work. Moreover, in this way they cannot get paint splatters all over them.
The next step is sanding and repairing the substrate. A paint will only adhere well to the surface when it has been well sanded and cleaned. Sanding the surface is done with fine-grit sandpaper, so that you break down the gloss layer without leaving deep grooves.
The kitchen is naturally a room that sometimes suffers from grease stains. It is important to clean these grease stains first. Make sure that the walls and cupboards are free of dust and grease. If you skip this step, the paint you are applying may not adhere properly and come off over time.
To degrease, it is best to use a special degreaser or cleaning agent. Also use warm water and dry with a clean cloth.
Before you start painting, you need to do some preparatory work. In concrete terms, this means that you have to tape all cupboards, tiles, worktops and other things, in order to protect them against paint splashes. For example, also remember to cover kitchen appliances with protective foil, in case drops fall.
Painting base coat Some paint jobs don't require a primer, but it's essential when painting the kitchen. A primer will not only ensure that the paint will adhere well, a white primer will also enhance the finishing layer.
For the kitchen, use an oil-based primer and coat the walls and cabinetry evenly. Applying one primer coat is sufficient in the kitchen.
If you have a melamine-based kitchen, it is best to choose a primer intended for this purpose.
Apply finishing coat: After you've applied the base coat and given it plenty of time to dry, it's time to apply the top coat. Apply the finishing coat in the same way as the base coat. First roll the paint roller vertically, then roll the paint horizontally. That way you spread the paint well, without making streaks.
After a first coat of finish, it's best to apply a second coat of finish so that your coat of paint has good coverage. Make sure to allow the first finish coat to dry thoroughly before applying the second coat.
Do you need a painting contractor in Los Angeles? We have a wide range of residential and commercial painting services available to you. Additionally, our contractors can work on your house or office, no matter the size or shape.
Varnishing woodwork provides a beautiful and satisfying result, provided you take into account the right conditions in the room and apply the correct painting technique.
In principle, you paint all types of wood and related panel materials in the same way. However, we are happy to give you some extra tips specifically for painting windows and doors and MDF.
When is the best time to do the painting job?● Make sure it is between 10°C and 20°C in the room
● Make sure that the air in the room is not too dry or too humid. Place some containers with water in the room if the air is too dry or turn on the heating if the air is too humid.
● Keep the windows closed while painting to avoid drafts. You can ventilate the room after painting.
● Make sure the room is free of dust when you start painting by vacuuming and mopping well.
Step 1: Clean and degrease the surface As with painting an interior wall, it is also important for paintwork to keep the surface clean and free of grease. The approach differs per surface:
● Unpainted wood and panel material (OSB or plywood): Remove dust and degrease with a suitable degreaser or ammonia water (one part ammonia to nine parts water).
● Painted wood in good condition: clean and degrease thoroughly.
● Wood with peeling paint layers: remove poorly adhering layers of paint by first degreasing well, then scraping, sanding or biting off with a paint stripper.
● Melamine (kitchen cabinets) and wall tiles: clean with a degreaser and scouring pad.
Step 2 - Repair, level and tape as needed For a perfectly smooth paint result, thorough sanding, from coarse sandpaper to finer grain sandpaper, is an absolute must. A well-executed sanding not only ensures an even surface, but also ensures that the paint will adhere better.
For a perfect result, it is important that the surface you want to paint is perfectly prepared. Nail holes, small cracks and tears can be filled with a suitable filler and a putty knife. Do you want to finish the wood transparently with varnish? Then use a filler in the color of the wood for a smooth look.
● Smooth the filler into the holes.
● Smooth with the putty knife and let dry.
● Repeat as necessary until the surface is even.
● Lightly sand the repaired areas.
A well-executed sanding not only ensures an even surface, but also ensures that the paint will adhere better. Especially with wood it is important to sand thoroughly with suitable sandpaper.
Careful masking and covering of everything you do not want to paint is also a must with paintwork.
Step 3 - Choosing the Right Paint and Tools● Paint: Waterborne paint is generally recommended for interior paint jobs. Find out what to look for when choosing the right paint.
● Brushes: Choose a brush that is adapted to the type of paint you use. After all, the bristles and composition of the brush are different for water-based than for solvent-based paint. It is best to paint with a round brush, for varnishing it is better to choose a flat one.
● Rollers: Choose a paint roller that is suitable for water-based or solvent-based products. You get the best results with a short-haired mohair roller or foam roller.
Check that you have all the paint and tools in your area and stir the lacquer well with a stirring stick.
Step 4 - Apply Primer Start - if necessary - with the application of the primer. Using a suitable primer is often recommended for paintwork. Only in this way is it possible to obtain a perfect end result. After all, a primer ensures that the top coats can adhere perfectly, even on surfaces other than wood.
A primer is indicated for:
● New or unpainted wood and sheet material.
● Certain tropical woods (merbau, afzelia, etc.) that can bleed through.
● Smooth surfaces such as melamine, wall tiles, metals and PVC.
Step 5 - Apply Lacquerer Apply two coats. Allow each coat to dry thoroughly and sand lightly (with grit P220-P240) between coats. Use a brush for corners, edges and upstands and a roller for larger areas.
Applying solvent-based lacquer● Apply the paint in vertical strokes.
● Then - without taking new paint - go horizontally over the surface to spread the paint well.
● Do the same in a diagonal direction.
● Finally, finish by lightly brushing the paint vertically, from bottom to top.
Apply water-based paint Proceed in the same way as with solvent-based paint but omit the diagonal painting as the paint dries faster.
Do you want to interrupt the painting?● Try to apply each layer in one go as much as possible for a tight, even result.
● If you do have to stop for a while, do this before you start a new surface (e.g. the side of a cupboard) to keep starting lines to a minimum.
● You should not clean your tools in between coats. Scrape most of the paint off the brush and roll and wrap in plastic wrap.
Tips for painting windows and doors● Small gaps and gaps between the woodwork and the wall should only be caulked after the primer and before the first final coat.
● Some (tropical) wood species, such as merbau and afzelia, contain dyes that are water-soluble. To prevent these dyes from bleeding through into the final coats, it is best to first give them two coats of water-based primer, or one coat of solvent-based primer. Important! To guarantee the insulating effect of the primer, it must be completely dried out. So always leave enough time between the two layers.
Tips for painting MDFAlways paint MDF on both sides (even if it is not visible) to avoid warping of the panel.
The ends of MDF are very absorbent. Therefore, give them two coats of primer before you start with the final coats.
Have you been searching for a good Painting Contractor Los Angeles? Look no further! With our expert services, we've become the most reliable Painting Contractor Los Angeles to date- with both interior painting and exterior painting. Whether it is for homes or businesses, our painters are always at their best.
Gone are the days when a bathroom wall was tiled as standard. Although tiles can withstand the high levels of moisture in the bathroom, they can sometimes have a dull and old-fashioned look. In addition, you are attached to your tiles for a long time, because it is of course an expensive matter to replace them.
More and more, painting the bathroom is on the rise. Painting bathroom walls has some interesting advantages over tiling bathroom walls. Of course you have a lot more choice in terms of colors. Paint is available in a wide range of colors, so you can let your creativity run wild.
Another great advantage of painting bathroom walls is the fact that you can quickly change your look when you are tired of a certain color. We already mentioned that bathroom tiles cannot be replaced every year because of the expensive cost. You do not have this problem with painted bathroom walls. A new color in the bathroom? That can be done quickly and cheaply!
Another great advantage of painted bathroom walls is that paint is increasingly resistant to moisture. Choose a waterproof primer and quality paint, and the chance that your paint layer will peel off is very small.
Bathroom painting: which paint to use? Of course, the choice of paint when painting a bathroom is crucial. Walls and paint will be exposed to high humidity for years. The paint you choose must of course withstand this.
If you have walls that consist of plasterboard panels, then at least choose plasterboard panels that are resistant to moisture. The water-repellent quality of these sheets is of crucial importance.
Primer: The choice of primer is also very important. Applying a primer in the bathroom is always a must, whether you are painting an unpainted wall, or just touching up or restoring here and there.
If you paint on plasterboard panels, an ordinary primer will suffice for interior walls. In this case, choose a solvent-based wall primer for indoor applications. When you apply this wall primer, it is wise to ventilate the bathroom, since not so pleasant odors will be released.
If you want to paint tiles, you also need a primer. In this case, choose a primer that is specifically intended for smooth surfaces. Then you can finish with lacquer paint.
Paint types: Also with regard to the actual paint types, water resistance is of course paramount. If you want to paint the bathroom yourself, check the packaging of the paint pot to see if the paint in question is suitable for use in the bathroom.
For the bathroom, for example, you can also use satin paint. This paint is glossy, and these types of paint are therefore easy to wash off. They also absorb little moisture and are resistant to mold growth. Ideal for the bathroom.
Bathroom painting: which colors to choose? The bathroom is a space where you can completely relax. Enjoying a blissful bath every now and then can do wonders. Of course you also have to create the right atmosphere. Painting the bathroom in soothing colors can then be a step in the right direction.
Natural colors Warm, natural colors always succeed in creating a soothing atmosphere. Think of colors such as soft green, beige and earth colors.
Cooler shades Cooler shades, such as blue and emerald green, have a more uplifting effect. These are ideal colors to wake up in the morning in a good mood.
Combination of colors As we mentioned at the beginning of this article, painting bathroom walls has the great advantage that you can let your creativity run wild. For example, why not experiment with a combination of colors? For example, apply neutral colors to the walls, and complement with decorations in vibrant colors.
Additional tips when painting the bathroom Since the bathroom is such a delicate place because of the high moisture content, we would like to give you some additional tips that can help you when painting your bathroom.
Ventilation The bathroom is a room with a high level of humidity. To avoid moisture problems in the bathroom, it is important that the bathroom is well ventilated. So make sure there is sufficient ventilation in the bathroom.
Ventilation is also important during painting work. Make sure there is sufficient air circulation during the painting work, so that the paint can dry properly.
Drying time By using water-resistant paint in the bathroom, you ensure that your layer of paint can withstand the high humidity in the bathroom. However, it is wise to ensure good air circulation in the bathroom immediately after painting. Give your paint the chance to dry sufficiently, so avoid intense vapor formation in the first days after painting.
Douche Some areas in the bathroom are just too damp to paint. For example, consider the inside of the shower. No water-resistant paint can withstand the excessive moisture and hot fumes in the shower. In this place it is therefore best to choose tiles instead of painting.
Is your home in need of painting? Are you on the lookout for good contractors in Los Angeles? You've come to the right place! As the area's most reputable Painting Contractor Los Angeles, we provide both interior and exterior painting services. One of our specialties is painting both homes and businesses.
Painting your facade immediately gives your house a new and fresh look. But what should you keep in mind when painting an exterior wall? And how do you get a perfect result? In this article A step-by-step plan you can read how best to paint the facade of your house.
Do you want to tackle the entire exterior of your home? Then start with the woodwork (windows, doors, shutters and gutter ) and do the facade last . After all, it is always easier to tape off wood than walls.
When do you paint an exterior wall? Are you going to paint an exterior wall? Then keep a close eye on the weather forecast. After all, painting in unfavorable weather conditions makes no sense. That means:
● Only paint at an outside temperature between 10 and 20°C. If it is warmer, the paint will dry too quickly, at colder temperatures the paint will dry too slowly or not at all.
● Does the wall you want to paint face south? Plan your job when the bright afternoon sun has already gone, so in the early evenings. Also, don't paint early in the morning because the afternoon sun will cause the paint to dry too quickly.
● In case of rain or fog, the humidity is too high and painting outside is not a good idea, even under a shelter.
● Too much wind dries the paint too quickly and can stir up dust and dirt, so only paint on windless days.
Step 1 – Clean and degrease the exterior wall A well-cleaned surface is important for a successful end result.
● Painted exterior walls in good condition can be cleaned with water and an appropriate cleaning agent.
● Unpainted walls may show a white rash. Brush this off with a stiff brush without water and make the wall dust-free.
● Remove any moss with the pressure washer or stiff brush and treat the wall with an anti-moss product.
Step 2 – Repair, level and tape where necessary To successfully complete your painting job, it is important that the surface is clean, solid, even and dry.
● Remove loose layers of paint with a stiff brush or a knife.
● Grind out bad or loose joints and re-join them with grout.
● Repair large tears and cracks with a custom filler or sealant.
● Fix powdery walls with a fixative.
● Always allow newly masonry brick walls or newly plastered walls to dry out long enough (at least 1 year) before painting.
● Also, after cleaning, fixing or repairing (cracks or joints) the outer wall, wait long enough before you start painting.
● Always address structural moisture problems before proceeding. Painting a wall that is too damp will cause problems in the long run.
● Seal windows and doors with masking film and masking tape.
● If possible, disconnect downspouts and cabling from the wall.
● Cover the ground against the wall you want to paint (the sidewalk, patio or lawn) with masking film or old blankets.
● If necessary, also protect plants that are nearby with a sheet or thin cover film.
Step 3 – Choosing the Right Paint and Tools Choosing a suitable color is of course important, but the choice of paint type and the right tools also contribute to a beautiful and durable end result.
Paint: When the outer wall is dry and in good condition, it is best to choose classic facade paint. If the outer wall is damp, you can treat and paint it with specifically adapted products.
Brushes: Use a round brush for corners and edges and a block brush for rough walls, such as brick.
Rollers: A facade roller with long hairs is ideal for applying facade paint.
Prepare new tools for work Run a new brush over a piece of sandpaper a few times and roll it between your hands to remove any loose hairs. New roller? First wet it well and roll it a few times over a piece of cardboard.
Step 4 – Apply the Right PrimerExterior walls are constantly exposed to wind and weather . Applying an adapted base coat or primer is in many cases necessary for an optimal and durable end result .
Always apply a primer to unpainted , repaired or intensively cleaned (eg anti-moss treatment) exterior walls . This provides a good base for the final layers. Walls that have already been painted and are still in good condition, in principle, do not need a primer.
Step 5 – Paint the Exterior Walls Finish the walls in two final coats. Use a brush for corners, edges, joints and hard-to-reach areas and a long-haired facade roller for large areas. Let the first coat dry thoroughly before applying the next top coat.
Do you want to interrupt the painting? Try to put each layer on it at once. If you have to interrupt the work, then finish the surface you are working on and end in a corner. This way the new start will be the least noticeable.
There is no need to clean the tool between two coats. Scrape off most of the paint and put the roller and brush in a plastic bag that you tie tightly.
Are you looking for a painting contractor in Los Angeles? If so, your search ends here. We offer the best residential and commercial painting services in Los Angeles, whether you need a painter for your house or office.
Painting your doors immediately gives your interior a fresh look. Moreover, painting doors or interior doors is a fairly easy job, which does not take much time. A fresh interior for little work, no wonder why many people like to give their interior doors a new coat of paint.
Although it is a fairly easy job, there are a number of points that you should keep in mind. In this article, we'll go over all the steps you need to follow when painting your interior doors. In addition, we also give you some tips for choosing the right paint for your doors.
Choosing the right paint! Let's start with the types of paint you can use to paint your doors. The paint you choose will depend, among other things, on the type of door you want to paint. In fact, all types of doors can be painted over. Wood and aluminum can be painted, but glass doors can also be painted.
The type of door you want to paint is first and foremost important for the type of primer you will have to use. If you have a wooden door, you need a different primer than if you want to paint aluminum doors.
With regard to the finishing layer, you have the choice between two main types of paint, the solvent lacquers and the water-based paint.
Solvent lacquers: Solvent lacquers are stronger and more scratch-resistant. They are mainly used in areas where a lot of greasy hands touch the doors, because they are more resistant to grease. Think especially of the kitchen.
Furthermore, solvent lacquers will also dry somewhat more slowly. This is mainly a practical detail, and means that you will be able to paint your door longer before it dries. This means that any mistakes in your painting can be rectified more easily.
Other characteristic properties of solvent lacquers are the strong odor nuisance during and immediately after painting, and the yellowing of pale colors over time.
water-based paint: Water-based paint is less thick and gives much less odor nuisance during and after painting. In addition, you will be able to wash off your painting materials more easily after you have finished painting. Paint stains during painting can also be cleaned up more easily if you paint with water-based paint.
Water-based paint dries faster, so you have to paint a little faster, and sometimes you don't have time to correct any mistakes later. Water-based paint is also much more sensitive to greasy hands.
Water-based paint is usually chosen for indoor applications, while solvent lacquers are used more for outdoor use, since solvent lacquers are more resistant to weather influences.
Which paint to choose? You can also choose a lacquer based on a gloss level. Anyone who paints regularly knows that there are different gradations, ranging from matte to high-gloss. What type of paint is best for your door? Well, a lot will depend on the visual effect, the substrate and the washability.
● Of course, the degree of gloss will have an influence on the visual effect of your doors. If you opt for a matt lacquer, your doors will have a more soothing appearance. If you opt for high gloss, your doors will immediately catch the eye and will become a real eye-catcher in your interior.
● The surface will also play a role in your choice for a matte lacquer or glossy lacquer. For example, a matte lacquer will be able to hide imperfections on your door much more easily than a high-gloss lacquer. So if you have a door with a lot of unevenness, because, for example, there are still remnants of an old paint layer on it, it is best to choose a matte lacquer. If you prefer a high-gloss lacquer, it is best to spend some extra time sanding your door, so that all imperfections are removed from the door.
● Finally, your choice of paint type will also influence the washability of your door. If you opt for a glossy lacquer, it will be much easier to wash your door with a damp cloth. This is not possible for doors with a matt lacquer.
Painting doors: step-by-step plan Painting your door may be a relatively easy job, but it is best to follow an accurate step-by-step plan to achieve the best possible result. The step-by-step plan is not that complex, and shows many similarities with other paintings. Let's go over all the steps.
Preparation Like all painting works, painting your doors also starts with good preparation. Several things are important here.
Removing old paint layers Removing old layers of paint is one of the possible steps you should take. We say possible, because that is of course not always necessary. It may be that your doors are new, then of course there is no old coat of paint on them. But even if an old paint layer is still in good condition, you do not necessarily have to remove it.
If the old paint layer does peel off, it is best to remove it completely to avoid unevenness in the result.
Cleaning the surface You only paint on a completely cleaned surface, which is also the case when painting doors. If you have wooden doors, it is best to sand them beforehand on a fine-grit sandpaper. Lightly sand the wood in the direction of the wood grain. First, sand lightly with a P150 grit sandpaper, then finish with a P240 grit sandpaper. After sanding, dust the doors again with a soft brush.
If your doors are greasy, you should also degrease the doors beforehand. You can do this using, for example, ammonia water (9/10 water and 1/10 ammonia) or a special degreaser. Then dry with a clean cloth.
Apply primer After the preparation you can start applying a base coat on primer. Such a primer is not always necessary. If your door already has an old coat of paint, a primer is often not necessary. But if it is an unpainted door, you must always apply a primer so that the paint layer can adhere well to the door.
Apply the primer to the corners and edges first with a brush. Afterwards you start on the large surfaces with a roll. Painting large surfaces with a roller is always done crosswise. Apply the paint vertically, and roll out horizontally, so that the paint or primer is well distributed over the surface. Roll out the last roller wipe slightly upwards.
After applying the primer, let the primer dry for a while. When the primer has dried, you should again lightly sand it with grit P240, and remove the dust.
Apply paint or varnish After applying and drying the base coat, it is time to apply the top coat. Before applying the paint to the door, it is a good idea to first stir the paint pot for a homogeneous color result.
Start painting the edges and corners. You do this with a paint brush. Afterwards it is the turn of the large surfaces, which you tackle with the paint roller. Here too, you first apply the paint vertically, and then spread the paint horizontally. Preferably use a short-haired paint roller for large surfaces. Gently roll out the last paint upwards.
After painting, let the paint dry and sand the door again lightly with P240 sandpaper. Afterwards, apply a second finishing coat, in the same way as the first coat.
After painting, it is best to remove the masking tape while the paint is still wet. That way it is easier to remove the masking tape.
Need a painting contractor in Los Angeles? We have residential and commercial painting services available to you and can work on a house or office, no matter the size or shape.
A staircase is often a prominent part of an interior. Something that catches the eye when you enter a home. That is why it is important that your staircase always remains in top condition, and that it retains the necessary appearance.
But that is not always easy. A staircase is used frequently on a daily basis, and wears out over the years. A staircase will soon look worn or damaged.
Since the stairs are such a prominent part of an interior, some people don't even wait that long to take care of their stairs. Giving your stairs a new color can already give your interior a completely different look.
But taking care of a wooden staircase is not just a routine job. Since stairs are used so often on a daily basis, it is important to use the right products to keep them as long as possible. In this article we will give you some tips and an extensive step-by-step plan to make your stairs look like new again.
Roadmap Painting a staircase follows a meticulous step-by-step plan.
Remove or sand old paint layer: Before you start painting the stairs, the old layer of paint must of course be removed. Certainly when the old paint layer starts to peel off, it is necessary to remove it first, in order to be able to apply the new paint layer in an even manner.
If the old paint layer does not peel off, you can sand the old paint layer. The method will usually depend on the type of paint layer. If it is an old stain or oil layer, you can only remove it by sanding. When it comes to a paint layer, you will often have to use a paint stripper, in combination with a paint scraper.
Please note, sanding the stairs can take a lot of time. If you plan to sand your stairs yourself, make sure to allow enough time in your planning.
Cleaning the stairs: When old layers of paint or oil have been removed, the stairs will be sanded again to make sure that all residues have been removed. After that, the stairs will have to be made dust-free and grease-free. With a properly cleaned staircase, the new layers of paint will adhere better, making it important that the staircase is clean. Cleaning can be done with a vacuum cleaner and a damp cloth. Finally, you can sand the stairs one last time with a finer sandpaper, with grit size P150 or P200). Make sure to always sand in the direction of the wood grain.
masking As with all other painting works, all surrounding objects will be taped when painting the stairs. Walls, floors and possibly the railings will be taped with special painter's tape or polyethylene foil to prevent dust, dirt or paint splashes from ending up on them.
Apply primer: Now that all the preparatory work is done, you can start applying a base coat or primer. Before you apply the first primer coat, it is best to check whether the stairs are perfectly dust-free and dry.
After the first primer coat has been applied and completely dried, you need to sand the stairs again. After sanding, apply a second primer coat, after which the stairs are lightly sanded again.
Apply coat of paint: After the two primer coats, you can finally paint the stairs in your favorite color. Just like with the base coat, you will have to apply several coats, with a light sanding in between. You will usually need to apply two to three coats. By sanding the stairs lightly in between, you will eventually achieve a nicer and smoother result.
Which paint to choose? The choice of paint for painting a staircase is very important. Stairs are walked up and down several times a day, so your stairs, and the paint you use, must be resistant to wear and tear. A paint with a 2-component floor coating is often used to paint a staircase. This paint consists of a base coating and a coating that ensures that the paint will harden. The latter is crucial to prevent wear.
Of course, safety must also be considered. You really don't want to slip on a staircase. That is why quite a few people opt for a stair runner, or a complete covering of the stairs. But you can of course also treat your stairs with an anti-slip paint layer. Such an anti-slip layer is much less expensive than stair coverings, and relatively easy to apply.
The aesthetic is of course also very important. After all, isn't that the reason why you paint your stairs? You can of course go in all directions for painting your stairs. If you are more of a classic person and your stairs are in a classic interior, neutral colors such as white, black, gray or beige will be the best option.
But the stairs can also be the ideal place to experiment with colors. If you want to give your interior a fresh look, the stairs are the ideal start. For example, the staircase is particularly suitable for experimenting with contrasting colors. For example, paint the wall a dark red, while painting the stairs in white. Or opt for white on the wall and a black staircase. You will be amazed by the spatial effect.
You can also experiment with colors on the stairs themselves. For example, give the steps a different color than the risers. Or give each step its own color. In short, you can't think of it that crazy. So you can certainly do something very creative with the stairs.
Price for painting a staircase: Painting a staircase is quite a difficult job. For an optimal result, you would do well to contact a professional painter. After all, your stairs are in a prominent place in the house, so you don't want it to look lousy.
Having your stairs painted by a professional painter guarantees you a top result, but of course you pay a price for it. How much would it cost if you had a professional painter come?
The cost of painting a staircase will generally depend on the number of steps to be painted and the difficulty of the staircase. For example, painting a staircase with closed steps will usually be slightly more expensive than a staircase with open steps.
What are the alternatives? Painting the stairs is just one of many ways to renovate a staircase. But you certainly have other options. We briefly list them here.
Transfer steps: Placing transfer steps is also a popular way to renovate a staircase. With transfer steps, new steps are placed on top of the existing ones. Also with this method you have quite a few different options. Laminate or vinyl are the most popular, but wood or concrete look are also options.
Sandblasting: Sandblasting is of course also a technique for renovating your stairs. Although this technique only works with wooden stairs, of course. In sandblasting, a blasting agent is sprayed onto the stairs under high pressure. As a result, the steps will be blasted cleanly and evenly, making the original wood structure visible again.
Upholstery: You can of course also just have the stairs upholstered or covered. With this method, the stairs are covered with a carpet. You can choose to cover the entire staircase, or just the middle. In the latter case, we speak of a stair runner.
Trying to find a good Los Angeles Painting Contractor? Look no further! Our professional services have made us the most dependable Painting Contractor Los Angeles to date - specializing in both interior and exterior painting. The painters at our company are the best at painting homes and businesses alike.
Painting your walls can give a fresh look to your interior. Giving your walls a new color immediately changes the look of the room. But sometimes it's just necessary to paint your walls. After all, over time, your walls can start to look musty. Also, paint may begin to peel, causing a new coat of paint to emerge.
Painting walls in itself is not that difficult. In principle, any do-it-yourselfer could do it themselves, without much can go wrong. Although the quality of the work can of course differ from that of a professional.
If you want to start painting yourself, we have developed a detailed step-by-step plan that you can follow to paint your wall. We take a closer look at the types of paint you can use and the different steps you need to follow.
For those who do not feel so sure, we have also compiled a price table with target prices, for those who would still like to work with a professional painter.
Types of paint: Let's start with the types of paint you can use to paint your walls. Anyone who has ever stepped into a do-it-yourself store knows that there are many types of paint. There are some differences between all types of paint, so it is worth knowing which type of paint is best for your wall.
Broadly speaking, there are two main types of paint: oil-based paint (alkyd or synthetic paint), and water-based paint (vinyl, acrylic, and latex paint). Oil-based paint is thicker, gives a more durable result, but is also less easy to paint with. If you have painted with oil paint, brushes are also less easy to clean afterwards. You then have to clean it with solvents or white spirit.
Water-based paint is thinner, easier to paint, and therefore the best choice for novice painters.
So even within the 2 major paint categories you still have subspecies within which you have to make a choice.
1. Acrylic paint Acrylic paint is paint based on acrylic. It is a more expensive type of paint that is mainly characterized by its vapor permeability. With acrylic paint, your wall gets an additional protective layer that easily absorbs and releases air and vapor. Because of these properties, this type of paint is mainly used in fairly humid areas, such as the kitchen or bathroom. In other areas, this paint is less popular because of the higher price.
2. Latex paint Latex paint, in contrast to acrylic paint, is much less vapor permeable. It is a paint that insulates much better, making latex paint much better suited to create a pleasant indoor climate. In addition, latex paint is also cheaper than acrylic paint, making it slightly more popular as well.
3. Textured paint Textured paint is a type of paint that is aimed at applying some kind of structure or relief to your wall. In fact, textured paint is a thick, pasty latex paint to which silver sand or quartz has been added. This allows you to create structure on a flat surface. With textured paint it is also much easier to mask irregularities in the wall.
How much paint do you need? To determine how much paint you need, it is important to first calculate the surface area of your wall. The area is calculated by multiplying the number of meters in length by the number of meters in width. Of course you have to subtract the surfaces that are not to be painted from this. Think of doors or windows.
Now that you know the surface to be painted, you can estimate the number of liters of paint. Usually the size of the surface to be painted is stated on the paint pot. But this usually depends on the thickness of the paint and the substrate.
To give an example, with 1 liter of latex paint you can paint an average of 5 to 8 square meters of wall.
Roadmap: Once you have chosen the right paint, you can get started. Painting your wall is not that difficult in itself, but of course you have to do it correctly. In concrete terms, this means that you cannot just fly in. Good preparation is just as important.
Preparation: You start the preparation by creating the necessary space for yourself. Everything that stands in the way, such as tables, chairs and cupboards, is best removed to another room. This not only gives you the necessary space, you also prevent them from getting paint splatters.
Everything that remains after that, such as fixed furniture, window boxes or floor coverings, should also be covered with a foil, so that they also do not get paint splatters.
When everything is covered, it's time to clean the walls. You only paint walls when the wall is completely clean and free of dust. For most walls it is sufficient to clean the walls with a cloth and a vacuum cleaner.
Don't forget to make your wall even. Holes and cracks must therefore be filled with filler. This is best applied with a putty knife. After applying the filler, sand the wall with a fine-grit sandpaper.
If there is still an old layer of paint on the wall to be painted, you should first see if it needs to be removed. Normally you can perfectly paint over an old layer of paint. But if this old layer of paint peels off, it's a good idea to scrape it off completely first. You can do this with a scraper and sandpaper. Even after scratching, you have to clean the wall before moving on to the next stage.
Primer: You start painting by first applying a base coat or primer. Especially with new walls it is important to first apply a primer, since the paint will then adhere better to the wall.
For a brick wall it is best to use a long-haired roller, while for plastering or plasterboard walls it is best to use a short-haired roller.
It is best to apply the primer crosswise. First put some vertical stripes, and then roll them out horizontally. Gently roll out the last roller stripes for an even result.
Wall painting: After applying the primer, you can start painting the wall. Make sure that the base coat has dried thoroughly before applying the first coat of paint. This usually takes at least 6 hours.
Painting the finishing layer is best done in a structured way. Start by painting around the edges and corners with a paint brush. Afterwards you go over this again with a small paint roller, to smooth out the paint and avoid streaks.
In a second phase you can start painting the large surfaces with a large paint roller. Divide the large areas into an imaginary small area of about one square meter. Paint alternately horizontally and vertically so that the paint is evenly spread and there are no streaks. When painting, use the paint roller with an even pressure.
You often need to apply a second or third coat of paint to get good coverage on the wall.
Finish: After painting, it is best to remove the tape when the paint has not yet dried. After all, it is much easier to remove a tape when the paint is still wet. In addition, you have much less chance of stripes or a jagged line at the edges.
If you want to use your material later, wash your brushes as soon as possible. Don't give paint a chance to dry on your brushes. Especially when you have painted with oil paint, it is important to wash paint brushes as well as possible. For oil paint, use solvents or white spirit. You can use water for watercolors.
Wall painting price: Painting walls in itself is not that difficult. Little can go wrong when painting a wall. Although the quality of the delivered work can of course differ between that of a beginner and that of a professional. If you have little experience with painting a wall, paint splatters can sometimes fly around. Also a wall with stripes is a classic mistake for beginners.
Don't you feel so sure? Then it is best to outsource the work to a professional painter. They paint walls day in and day out, and can guarantee a perfect result. Moreover, they can also assist you with color advice.
A professional painter guarantees a beautiful end result, but of course also costs some money. How much it costs, of course, depends on the surface to be painted.
If you're looking for a painting contractor Los Angeles, then your search will end at our company. We provide both interior & exterior painting service with a strong focus on quality and customer satisfaction. You can choose residential or commercial painting jobs and know that you'll be hiring the best professional service.